Copasspupil
Jeep Owner
Scale of 1-10 how hard or tricky is drilling the holes and install the rivet nuts?
We used a 1/2" and it worked perfectly. Some needed a little wobble of the drill to fit, but the tighter the better. We used a wrench and a socket and ratchet with the rivnut tool and we did not have forearm issues, but we wrench daily.Did you use a 17/32 or finish with a fluted bit for finishing hole size?
I would suggest NOT to use a step bit as you can be drilling into other items behind the body and not know it. Just use a normal 1/2" drill and use a rat tail file, or the drill to slightly enlarge the hole. Remeber, you want a tight fit., Not too tight that you dent the metal tapping it in, but stull snug.Perfect. Thanks. I’ll start on the holes then
You will be set with that bit alone.Well I canceled the fluted reamer since it was delayed another week so I have a set of 118* bits to use and I’ll get a nicer grinding wheel but to use to make it right.
Left them alone for me.Next question. What did you guys do for the leftover holes that have sprayed in foam and other holes?