6365 - UnderCloak Skid Plate System, 3.6L Motor

[Metalcloak]

Please click the link below to view instructions (.pdf) referenced in the title of this thread.

JT UnderCloak Skid Plate System, 3.6L Motor

Please assist us in our commitment to continuously improve our installation instructions. If you think information is missing, have advice to share with others, or have clearer pictures/illustrations please post them to this thread. All feedback is greatly appreciated!

Only One Rule...Please Be Cool.

If you notice a post that has been deleted, we likely implemented the idea into our published instructions.

Questions about your installation?
Please email [email protected] or call 916-631-8071

The comments in this forum do not represent official advice from MetalCloak. Users of MetalCloak products follow the advice of others at their own risk.

 

[Sass]

One thing I’d highly suggest to do before putting up the gas tank skid is to hand tight install the top portion of the mid hanger that’s right next to the carrier bearing bolt. There is not a straight shot with tools when that big skid is in the way… it will save you at least 15 mins of work