Suggestion: New Product or Product Redesign

[OscarMike]

NOTE: This Question/Suggestion is for @Metalcloak only. All others, Please do not reply to this thread.

Dear @Metalcloak

I've very interested in the Mirrors you have at your site. However the issue we're having is that the manufactured jeep mirrors are to low or not tall enough. They're plenty wide enough just not tall enough for how I drive. Even though I tilt the mirror up as much as possible it's still angled to low for me. I would like you to take your design a step farther and create a replacement mirror for the Jeep Wrangler JK/JKU model that is about 4'' inches taller than the stock mirror yet work in the factory side door housing. So is it possible to create another mirror based on your design but taller and fit into the current Jeep mirror housing? Again the width is fine, we just need the mirror about 4'' inches taller and fit into the jeep door hardware.

Metalcloak Open Frame Tube Door Mirror Kit

The Jeep Wrangler & Gladiator Mirror Kit is designed for MetalCloak's Open Frame Tube Doors. Features Include: Designed for MetalCloak Open Frame Tube Doors Three Bolt Attachment Four Position Articulating Arm Positional Mirror All Hardware Included Adapted from TJ/LJ Wrangler Stock Mirrors...

metalcloak.com

 

[OscarMike]

Yesterday while at the modernjeeper Youtube, I submitted a suggestion via the chat room. I asked if @Metalcloak could design a set of short adjustable sway bar end links that utilize a reduced size Duroflex bushings instead of the typical ball joint type bushing. We'll see if someone gets back to me on this.