Steering Stabilizer Tie Rod Mount

Metalcloak

Supporting Vendor
Please click the link below to view instructions (.pdf) referenced in the title of this thread.

JK Steering Stabilizer Tie Rod Mount

Please assist us in our commitment to continuously improve our installation instructions. If you think information is missing, have advice to share with others, or have clearer pictures/illustrations please post them to this thread. All feedback is greatly appreciated!

Only One Rule...Please Be Cool.

If you notice a post that has been deleted, we likely implemented the idea into our published instructions.

Questions about your installation?
Please email [email protected] or call 916-631-8071

The comments in this forum do not represent official advice from MetalCloak. Users of MetalCloak products follow the advice of others at their own risk.
 

OscarMike

Jeep Lover
Although we had to settle for the cheapest mount for this installation, we're planing on upgrading to the billet mount in the near future. But again. The nephew handled all of the installation on the tie rod, we removed the Moog tie rod, took some measurements then adjusted the Metalcloak tie rod the same distance. The only issue we ran into was while having the alignment done on the jeep, the stabilizer mount was moved over approx 1 inch because the shop tech lost steering to the left. Otherwise everything was nearly spot on. Not bad for a kids first time installing these kinds of parts on a Jeep Wrangler.

imageedit_1_9387957735.jpg

For more information and to order your Metalcloak products: Search For Jeep Wrangler JK/JKU Products

Official Metalcloak Gold Member
 
Last edited:
Top