Ask the Expert

NVDesertRat

Jeep Newb
I am currently running a 4.5” GC short arm lift with the DB3s in the rear with ProRock 60 axles. I would like to upgrade the front suspension to the long arm with lock-n-load. Can this be done with the ProRock 60 or will I need to go with the 4-Link long arm?
 

Attachments

Pthorpe84

Moderator
Staff member
I am currently running a 4.5” GC short arm lift with the DB3s in the rear with ProRock 60 axles. I would like to upgrade the front suspension to the long arm with lock-n-load. Can this be done with the ProRock 60 or will I need to go with the 4-Link long arm?
I agree with cloaked willys. I was able to make it work with my Fusion Axle. I can take some measurements on how far apart the upper and lower is for you if you want. It works well, but if you want good on-road handling make sure to lock it down after your done wheeling. That spring allows for a lot of movement.
 
Top