Caster should be around 5 degrees and your front pinion angle will be determined by your caster setting. Toe in is set at about 1/8" for those size tires. Do you have a dual cardigan rear shaft?Hi, just installed MC 2.5” game changer Rocksport edition with 37x12.5” on my 2017 2dr Rubicon. Looking for confirmation of best setup
-front caster angle
-front pinion angle
-toe in
- rear pinion angle
Many Thanks
John
Brian is 100% on this. 4.5°-5.5° is where the JK's like to be. Front pinion will follow with this.Caster should be around 5 degrees and your front pinion angle will be determined by your caster setting. Toe in is set at about 1/8" for those size tires. Do you have a dual cardigan rear shaft?
How are your ball joints? May I also ask if you are measuring toe? If so, is it from the front of the tire? The larger the tire, the farther away from the axle and the less actual toe in you have.I’m frustrated with toe. I have done 1/8” toe in and at different speeds I will still get death wobble. Right now I can get it every once in a while at around 30 mph. This is with the new tie rod and balanced new tires. I’m hoping the new lift and drag link will cure some of this. I am also in the process of going redneck ram. Currently I am running no steering stabilizer...mainly because I keep smashing them.
Sent from my iPhone using Tapatalk