Artec
Supporting Vendor
That's Right , NEW TJ PRODUCTS !!!! We haven't forgot about the TJ guy's .
Stock Trackbar Bracket Replacement for TJ Front Axle
This heavy bracket is designed to replace the weak factory trackbar bracket on the front 30 and Rubicon 44 axles in the Jeep TJ, LJ, XJ, and ZJ. The factory bracket often has a wallowed out hole allowing axle shifting and is one of the major contributors to the feared DEATH WOBBLE. This bracket replaces the factory bracket for better piece of mind. The 1/4" thick CNC precision cut and formed components of this setup ensure a quality, heavy duty solution.
NOTE: This bracket is NOT bolt on and requires welding. Cutting off the factory tracbar bracket is required and welding this in it's place.
Joint width is 1.66", so use our NARROW MISALIGNMENT SPACERS with 7/8" HEIMS if you are building your own Trackbar.
Features include:
Heavy duty construction from 1/4" mild steel...won't wallow out like factory bracket.
Precision CNC laser cut and bent for great fitment.
Possible solution to fix DEATH WOBBLE.
Tab and Slots allow for perfect alignment and easy installation*
Replaces factory swaybar mount as well.
Works great with an Artec truss
TJ Aluminum Body Mount Spacer Kit
The perfect compliment to our TJ Boatside Body Mounts, these CNC machined Aluminum Spacers allow you to get a 1.25" body lift on the radiator and the four rear most body mounts if you do not already have a pre-existing body lift kit.
Features:
CNC Machined 6061 Aluminum body mount spacers
Grade 8 hardware
Works for TJs and LJs
MADE IN THE USA!
***NOTE: FOR USE ONLY WITH ARTEC TJ BOATSIDE BODY MOUNT 1.25 inch body lift***
Got the Bowing Spring Blues? Our TJ Rear Coil Correction Kit is the answer.
Our new TJ Rear Coil Correction Kit fixes a common problem on lifted Jeeps...bowing springs. The OEM spring perches were set at an angle which is great for no lift but once you start to lift your vehicle, the angles change resulting in bowing spring that can be permenantly damaged an even unseated during articulation. Our correction kit eliminated the factory angle allowing any lift height with no bowing. We even add provisions if you want to do a 1 inch stretch.
Features:
CNC Laser cut and CNC bent from 3/16" thick steel
CAD designed with models directly from Chrysler to fit perfectly
Choose between STOCK LOCATION or 1 inch STRETCH
Factory tracbar mount etched cutout
Etched alignment mark
Accepts factory jounce cup and bolt
Side specific etching
Works for TJs, and LJs and can be used in YJs for a coil conversion.
MADE IN THE USA!
Stock Trackbar Bracket Replacement for TJ Front Axle
This heavy bracket is designed to replace the weak factory trackbar bracket on the front 30 and Rubicon 44 axles in the Jeep TJ, LJ, XJ, and ZJ. The factory bracket often has a wallowed out hole allowing axle shifting and is one of the major contributors to the feared DEATH WOBBLE. This bracket replaces the factory bracket for better piece of mind. The 1/4" thick CNC precision cut and formed components of this setup ensure a quality, heavy duty solution.
NOTE: This bracket is NOT bolt on and requires welding. Cutting off the factory tracbar bracket is required and welding this in it's place.
Joint width is 1.66", so use our NARROW MISALIGNMENT SPACERS with 7/8" HEIMS if you are building your own Trackbar.
Features include:
Heavy duty construction from 1/4" mild steel...won't wallow out like factory bracket.
Precision CNC laser cut and bent for great fitment.
Possible solution to fix DEATH WOBBLE.
Tab and Slots allow for perfect alignment and easy installation*
Replaces factory swaybar mount as well.
Works great with an Artec truss
TJ Aluminum Body Mount Spacer Kit
The perfect compliment to our TJ Boatside Body Mounts, these CNC machined Aluminum Spacers allow you to get a 1.25" body lift on the radiator and the four rear most body mounts if you do not already have a pre-existing body lift kit.
Features:
CNC Machined 6061 Aluminum body mount spacers
Grade 8 hardware
Works for TJs and LJs
MADE IN THE USA!
***NOTE: FOR USE ONLY WITH ARTEC TJ BOATSIDE BODY MOUNT 1.25 inch body lift***
Got the Bowing Spring Blues? Our TJ Rear Coil Correction Kit is the answer.
Our new TJ Rear Coil Correction Kit fixes a common problem on lifted Jeeps...bowing springs. The OEM spring perches were set at an angle which is great for no lift but once you start to lift your vehicle, the angles change resulting in bowing spring that can be permenantly damaged an even unseated during articulation. Our correction kit eliminated the factory angle allowing any lift height with no bowing. We even add provisions if you want to do a 1 inch stretch.
Features:
CNC Laser cut and CNC bent from 3/16" thick steel
CAD designed with models directly from Chrysler to fit perfectly
Choose between STOCK LOCATION or 1 inch STRETCH
Factory tracbar mount etched cutout
Etched alignment mark
Accepts factory jounce cup and bolt
Side specific etching
Works for TJs, and LJs and can be used in YJs for a coil conversion.
MADE IN THE USA!