TRACK-LOK? Wtf

BUSHMASTER22

Jeep Newb
I have a 2003 tj with a dana44 rear I took the 3rd member out and found a track lok. that being said there is no locking going hence I took the rear apart to put in a spool. I wasn’t aware of this trac lok anyone know anything about these are they worth rebuilding?
 

Attachments

TJDon

Wrench guy
The track loc is decent, the clutches are replaceable as a kit. It does require either special tools to compress the outer (axle shaft gears) to roll out the other 2 spider gears to replace the clutches. Can be done with some ingenuity

This isnt exactly how I do it, but this vid shows what needs to be done. I use 1 long bolt and 2 nuts against each side gear on the inside to compress the upper and lower side gears at the same time then rotate the housing to remove the spider gears. Totally makes sense right? LOL



Usually special friction modifier fluid is required, if you don't use it. The clutches will wear out prematurely
 

russebp

Jeep Newb
I know the Willys JKs came with them on the rear, and I’ve seen them perform where open-diffs did not. For my own Jeep, though, I was attracted to TrueTracs for automatic traction.
 
Top