When I was in College in Michigan had an MGA. They came with a crank and a puka in the front bumper to run the crank into the receptacle fitting for crank on the pulley nut on the crank shaft. Got real fond of that crank as the Bendix on the starter was exposed to water sprayed up off the...
There are clutch limited slips and Torson geared limited slips. The TruTrac Torson diffs don't have clutch disks to wear out so seem to be a better way to go if you are going LSD. My question is what are the disadvantages of using a TruTrak in the front. The 80-20 split in wheel turning...
Leave the castle nut loosely on the threads. Hold a heavy hammer against one side of the Pitman Arm at the tie rod end and strike the other side with a hammer. A few blows should see the tie rod end drop free but kept from hitting the ground by the castle nut.